Prodigy Trailer Brake Controller Manual at Sanora Shepard blog

Prodigy Brake Controller Instruction Manual. Prodigy Brake Controller Installation Instructions Page 1 The boost button was designed to allow a more aggressive When backing a trailer you can cancel "BOOST" and Electronic Brake Control 1 Your Prodigy P2 brake control has a unique connector located at the back of the control.

Technical Assistance Call Toll-Free: 1-888-785-5832 or www.tekonsha.com P/N 7689 REV H Instructions for Electronic Brake Control ELECTRONIC BRAKE CONTROL INSTRUCTIONS 1 Installation Guide WARNING The Prodigy must be mounted from 0 degrees to 70. CAUTION This control is not designed for use with electric-hydraulic trailer brake systems

Prodigy Electronic Brake Control Instructions

The PRODIGY iD will brake proportionally in reverse The Prodigy P2 can be mounted from 0 degrees to 360 degrees vertically in the direction of travel Keep these instructions with the Brake Control for future reference

Prodigy P2 Brake Controller Wiring. It senses deceleration and generates an output that is based on deceleration, thus the term "Proportional Braking" The Prodigy P2 can be mounted from 0 degrees to 360 degrees vertically in the direction of travel

Tekonsha Prodigy P2 Brake Controller User Manual intensiveboys. Front of the Prodigy P2 must be horizontal (+ _ 20 starts out at approximately 14% of the power setting and • Do not mount or activate RF generating items (cell phones, two way radios) near